Connecting SolarEdge Inverters With WiFi To A Local Wireless Network

This article will walk you through the step-by-step guide of how to reconnect your SolarEdge Inverter to your home’s Wi-Fi. This is the first (and often the only) step on troubleshooting SolarEdge connection issues.

Please watch this video on how to reconnect you screenless SolarEdge inverter to WiFi. Or refer below for written steps.

 

Step 1

Download the ‘My Solar Edge’ app.

Step 2

Select ‘Inverter communication’.

Step 3

Select ‘Configure’.

Step 4

Select ‘Connect with WPS’ or choose your home network from the available networks.

Step 5

Type your password, then select ‘Join’.

If this did not work, please attempt the following, then re-attempt connection:

1. Turn off AC isolator
2. Turn off DC isolator
3. Turn off Wi-fi modem for 10-20 seconds and then turn it back on
4. Turn on DC isolator
5. Turn on AC isolator
6. Let it be for 15 minutes

If you need help completing the above procedures, please take photos of where you got stuck and contact SolarEdge Service Department on 1800 465 567.

If you have any other issues about your 1KOMMA5° system, please take photos of your meter board, the inverter display, and the issue you have, and email them to the 1KOMMA5° Support Team here.